BVCGY - LITHIUM HYDRIDE
- MSDS: BVCGY
- Manufacturer: FMC CORP
- Product Name: LITHIUM HYDRIDE
- National Stock Number: 6810-00N048503
Product Identification
Product ID:LITHIUM HYDRIDE
MSDS Date:04/12/1991
FSC:6810
NIIN:00N048503
MSDS Number: BVCGY
Responsible Party
US
Emergency Phone: 704-629-5361;800-424-9300(CHEMTREC)
Info Phone: 704-868-5300
Cage: 0TYC8
Contractor
Telephone: 303-595-9048
Cage: 5D132
Ingredients
LITHIUM HYDRIDE (SARA III)
CAS: 7580-67-8
RTECS: OJ6300000
Fraction By Weight: 95-99%
OSHA PEL 0.025 MG/M3
ACGIH TLV: 0.025 MG/M3
LITHIUM HYDRIDE HAS HIGH
RTECS: 9999999ZZ
USING COPIOUS WATER FLUSHES AND GASTRIC GAVAGE, IF
RTECS: 9999999ZZ
GOGGLES AND FULL LENGTH FACE SHIELD .
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CORROSIVE TO EYES (MAY CAUSE
BLINDNESS), SKIN, NOSE AND THROAT. INHAL EXPOSURE TO LIH DUST WAS
INTENSELY IRRIT & CAUSED CORROSIVE LESIONS OF THE SKIN AND UPPER
RESPIRATORY TRACT IN LAB ANIMALS; EMPHYSEMA, BELIEVED SECONDARY TO
COUGHING/SNEEZING ACTIVITY, WAS NOTED IN THE LUNGS AFTER 5
EXPOSURES.(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYE CONTACT: CORROSIVE. SKIN
CONTACT/INHALATION: CORROSIVE. INGESTION: CORROSIVE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:IMMED FLUSH W/WATER FOR @ LEAST 15 MIN, LIFTING THE UPPER
& LOWER LIDS OCCASNLY. SEE MD IMMED. SKIN:IMMED FLUSH W/PLENTY OF
WATER. IF IRRIT OCCURS & PERSISTS, OBTAIN MED ATTN. INHAL:REMOVE TO
FRES H AIR. SUPPORT RESP, IF NEC. IF DISCOMFORT OCCURS & PERSISTS,
SEE MD. INGEST:DRINK TWO GLASSES OF WATER. DO NOT INDUCE VOMIT. DO
NOT GIVE ANYTHING BY MOUTH TO AN UNCON PERSON. SEE MD IMMED.(ING 2)
Fire Fighting
Extinguishing Media:DO NOT USE WATER OR CARBON DIOXIDE! USE GRAPHITE,
SUCH AS LITH-X (ANSUL), OR DRY LITHIUM CHLORIDE.
Fire Fighting Procedures:DO NOT USE WATER OR CARBON DIOXIDE. WEAR
NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . CAN
REIGNITE AFTER FIRE IS INITIALLY EXTING. (SUPP DATA)
Unusual Fire/Explosion Hazard:MAY CATCH FIRE SPONTANEOUSLY IN AIR.
REACTS VIOLENTLY WITH WATER OR HUMID AIR.
Accidental Release
Spill Release Procedures:KEEP AWAY FROM WATER, HUMID AIR, ACIDS,
OXIDIZING MATLS & HALOGENATED HYDROCARBONS, AS THESE ARE SOURCES OF
IGNIT. COLLECT PROD & PLACE IN A SUITABLE CNTNR. SHOULD IGNIT
OCCUR, FOLLOW RECOMMENDEDATION S IN FIRE FIGHT PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:PREFERABLY USE IN AN INERT ATMOSPHERE
IN NITROGEN OR ARGON, OR USE IN A WORK AREA WHERE RELATIVE HUMIDY
IS BELOW 50%.
Other Precautions:KEEP AWAY FROM WATER, HUMID AIR, ACIDS AND OXIDIZING
MATERIALS. KEEP AWAY FROM HEAT, SPARKS, AND FLAME. KEEP CONTAINER
CLOSED & STORE IN COOL AREA. WASH THOROUGHLY AFTER HANDLING.
Exposure Controls
Respiratory Protection:USE IN WORK AREAS HAVING ADEQUATE VENTILATION;
OR WEAR A HELMET SUPPLYING BREATHING AIR. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS (ING 4)
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER WHICH
MEET ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:NEVER LEAVE EXTING FIRE UNATTENDED. AFTER ALL MATL HAS
APPARENTLY BURNED &/OR COOLED, CAREFULLY TURN OVER REMAINING
RESIDUE & BE PREPARED TO REEXTING SHOULD REIGNITION OCCUR.
CAREFULLY PLACE RESIDUE IN A STEEL DRUM, USING ALONG-HANDLED
SHOVEL, & COVER W/EXTING MEDIA.
Chemical Properties
Boiling Pt:B.P. Text:1328F,720C
Melt/Freeze Pt:M.P/F.P Text:1267F,686C
Spec Gravity:0.8
Solubility in Water:REACTS VIOLENTLY
Appearance and Odor:OFF-WHITE TO BLUISH GRAY TRANSLUCENT SOLID;
ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
WATER, HUMID AIR, HALOGENATED HYDROCARBONS, OXIDIZING MATERIALS, ACIDS.
Stability Condition to Avoid:CONTACT WITH INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:HYDROGEN GAS, LITHIUM HYDROXIDE AND/OR
LITHIUM OXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF MATERIAL ACCORDING TO FEDERAL, EPA,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.